Fraser Static Gererator 30KVA Bar 500mm T5

The 7130 Generator Bars are charging electrodes which provide a safe, controllable, reliable and cost-effective method of applying static charge for temporary adhesion in industry.
7130-T5: Tungsten emitters at 5 mm pitch, 400 Mohm resistance.

7130 Generator Bars , have connectors for older 30 / 50kV generators.
These robust static generation bars meet the temporary adhesion requirements of high performance machinery.

Robust, with all parts completely encapsulated for reliability and safety
Individually resistively coupled tungsten emitters for a long, reliable life
Standard 10 mm emitter pitch for even charge application
Cable protected with flexible nylon conduit, cable exit 180° or 90°
Using with IONFIX Generators gives the operator full control and operational feedback
7130 / 7150 / 7160 Generator Bars are used in a wide range of electrostatic adhesion applications, including interleaving, pinning, laminate worktops, labelling, in-mould labelling (IML), wrapping, chill rollers and bagmaking.

Options

7130-/50-/60-T5: Tungsten emitters at 5 mm pitch, 400 Mohm resistance.
7130 / 7150 / 7160 Emitter Mask (Part No. 715003): to cover live emitter pins where they are not needed. 1 m length to cut as required. See separate Datasheet.
90° cable outlet.

Construction

Extruded FR-ABS with ABS end caps, epoxy resin. Tungsten emitters at 10 mm pitch.

Dimensions

20 x 69 mm (W x H).
Available Lengths: minimum 200 mm, then in 100 mm steps to 4000 mm.
Active length is 70 mm less than overall length.
A 60 mm option is available for specialist applications.

Cable

2 m of 60 kV cable. Longer lengths can be specified at time of order. Cable terminates in HV connector. Protective nylon conduit on cable. Minimum bend diameter 100 mm.

Safety

170 MOhm resistance for safe operation.

Environmental

Clean, dry and oil-free location.
Temperature: 0 - 60 °C, 70 % rH non-condensing max.

Generator

7130 for 30 kV generators.




Certification

CE.

Options

7130-/50-/60-T5: Tungsten emitters at 5 mm pitch, 400 Mohm resistance. Emitter Mask (Part No. 715003) to cover live emitter pins where they are not needed - see separate Datasheet. 1 m length to cut as required. 90° cable outlet.

7130_TDS Generation - Laminated Melamine Worktops -Solutions-2017